Web Content Display Web Content Display

Mr. Arindam Ghosal


Educational Qualification  

Master of Engineering (ME) in Industrial Materials and Metallurgy, "Failure Analysis of a Tractor Bull Pinion Gear" from Punjab Engineering College, Chandigarh in 2005 with 1st Division.

Qualified GATE in Mechanical Engineering in 2003.

B.Tech in Mechanical Engineering (2002) from Institution of Engineers in 2002.

B.Sc from Burdwan University with subject combination Physics, Chemistry and Mathematics in 1995.


Six years of Industrial experience in Production, QC department, R&D and seven years of teaching experience.

Presently working as Associate Professor – Department of Mechanical Engineering in Dronacharya group of Institutions, Greater Noida from 16th August'2010 with a rich experience of 07 years in teaching.

Worked with M/s Roy Techno, Burdwan (WB) from Aug 1998 to April 2002 as a Shop Manager in Fabrication Department. The company was a big Manufacturer of body of TATA And Ashok Leyland bus and Trucks.

Worked with M/s Machine -O-Techno, Sodepur (WB) from April 2002 to August 2003 as a Supervisor in quality control and fabrication department. The company was the manufacturer of various Machines and Boiler.

Worked in Lingaya's University, Faridabad as an Assistant Professor in Mechanical Engineering Dept. from 6th July' 2006 to 31th July' 2010.

  Short Term Courses  

Completed short term course ("Research Scheme in Mechanical Engineering"), organized by Dinabandhu Choturam University, Murthal, Sonepath Govt. of Haryana, from 20-24 Jan'09.

Completed short term course ("Faculty Development Programme'09"), organized by Lingaya's University, Haryana, from 8th-10th July'09.

Wipro Mission 10X faculty development programmed from 27th Sept'2011 to 1st Oct'2011.

Completed QIP short term course ("Manufacturing techniques and Quality excellance"), organized by IIT Roorkee, from 09-13 July'2012.

Completed QIP short term course ("Hydraulic Jets and Plumes"), organized by IIT Bombay, from 14th-18th Jan'2013.


A Ghosal, A Manna,‘Response Surface Method based Optimization of Ytterbium Fiber Laser Parameter during machining of Al/10wt% Al2O3-MMC', 'International Journal of Optics and Laser Technology', Elsevier publication, Vol. 46, 2013, pp 67-76.

A Ghosal, A Manna, A K Lall‘ An experimental investigation for optimization of Ytterbium Fiber Laser parameter during machining of Al/5 wt%Al2O3-MMC', IGI Global PUBLICATION, International Journal of Surface Engineering and Interdisciplinary Materials Science', published from U.S.A.

A Ghosal, A Manna, A K Lall‘Fiber Laser Machining Of 10 Volume % Aluminium-Alumina Composite Material', International Journal of Engineering Science and Management, Vol. 1, Issue 1, February'2011, pp 50, ISSN 2231-3273.

A Ghosal, A Manna, A K Lall‘ An Analysis of Laser Machining Process of Aluminium-10wt%Alumina Composite Materials', International Journal of Engineering Science and Management, Vol. 2, Issue 1, Jan-June'2012, pp 28, ISSN 2231-327.

A Ghosal, A Manna, A K Lall ‘Optimization of Ytterbium fiber Laser Parameters based on Response Surface Methodology, during machining of 5 mm thick EN353, International Journal of Engineering Science and Management, Vol. 2, Issue 2, July-Dec'2012, pp 75, ISSN 2231-3273.

Ghosal A, ‘Ytterbium Fiber Laser parameter optimization during drilling of Al/15 wt%Al2O3-MMC', International Journal of Engineering Science and Management, Vol. 3, Issue 1, Jan-June'2013, PP 24, ISSN 2231-3273.

  Conferences/ Seminars / Workshops  

‘A study on Failure of a Tractor Bull Pinion Gear', National conference in Advanced Materials and Manufacturing Technology'07, Punjab Engineering College, Chandigarh, 21st -22nd September'2007.

‘Failure Analysis of a Tractor Bull Pinion Gear', National Conference on Farm Mechanism'08, CMERI, Durgapur, W.B, 26th – 27th February'2008.

‘Advance Production Technology', National Conference on Automation Trends in Manufacturing Industries: Cutting Edge Technologies and their Impact, Institution of Engineers (India), Delhi State Centre, New Delhi. 23rd – 24th May'2008.

‘Biodiesel: The Future Fuel Source', National seminar on Efficient Conversion of new and renewable energy for electricity'08), JNCT, Bhopal, 22nd-23rd December'2008.

‘Nano science and Nano technology-A modern gateway of research', National conference on Application Specific Trends of Electronic Devices Circuits and Systems'09, Lingaya's Institute of Management and Technology', Faridabad, 6th -7th February'2009.

‘Comparison the properties of forged steel at different cooling rates', International conference on Recent Advances in Material Processing Technology'09, National Engineering College, Kovilpatti, Tamil Nadu, 25th -27th February'2009.

‘Nd:YAG Laser cutting of ceramic material', International conference on Engineering Education for Sustainable Development'09, World University of Bangladesh, Dhaka, Bangladesh, 19th -20th December'2009.

‘Bio Diesel: The Substitute of Petroleum Diesel', International conference on Advances in Mechanical Engineering'2010, Sardar Vallabhbhai National Institute of Technology, Surat, Gujrat, 4th -6th January'2010.

‘Parameter Optimization during Ytterbium Fibre Laser Machining of 5mm thick EN353 Steel', National Seminar on Material characterization by Ultrasonics,' 2012, Amity School of Engineering And Technology, Bijwasan, New Delhi, 3rd and 4th April'2012, pp 85.

‘Electro Handy- A Vehicle for Physically Disabled People', International conference on Automation and Mechanical Systems', Lingaya's University, Faridabad, 21st-22nd March'2013.

‘Ytterbium Fiber Laser parameters Optimization during machining of Al/15wt% Alumina-MMC', National conference on "Treand and application of Laser Technology and Optoelectronics", 4th April 2013 at (Amity University, Gurgaon).

Membership of Professional body  

Associate Member of The Institution of Engineers (India).

Life Member of Indian Society for Technical Education (ISTE).

Nominated as Chartered Engineer by The Institution of Engineers (India).

Member of International Association of Engineers (IAENG).