Web Content Display Web Content Display

Options

Project Project

Options


 

A

Synopsis


 

On

Hydraulic Gate

By

Vindhyavasini Jaiswal

DGIGN-14-ME (9388)


 

Under the supervision of


 

Mr. Gaurav Shival (Assistant Professor)


 


 


 


 

Department of Mechanical Engineering

Dronacharya Group of Institution, Greater Noida

 


 

Abstract:-

These are used to automatically open an electric driveway gate. As the name implies the use hydraulic fluids to operate their motion. Typically hydraulic operate have less moving parts than mechanical operator. Automatic gates are used to control access into a secured area. Most commonly, automatic gates are used at the entrance to the facility, and are used to control vehicular access on and off of the site. For example, a manufacturing plant may use an automatic gate at its main entrance. All vehicles entering and exiting the plant must do so through the automatic gate. Automatic gates are also used at interior areas within a facility. For example, automatic gates are commonly used within the inside of a parking garage to separate employee parking areas from public areas of the garage.

INTRODUCTION

Automatic gates consist of two basic components:

  • Gate: The gate is the physical object that is moved to block the gate opening. Most gates used in commercial applications are made of either ornamental iron or chain-link material and are usually designed to match MECHANICAL

  • Gate Operator: The gate operator is the machinery that moves the gate in and out of the gate opening. Gate operators are electrically-powered and may be chain-driven, gear-driven, or hydraulic depending on the type of operator

METHODOLOGY:-

  • Drawing power from the mains to open a driveway gate. Generally there are four types of electromechanical gate operator: Worm driven (or screw type) swing gates, barrier arm operators and sliding operators Electric and automatic gate openers are designed for both sliding and swinging gates. They can be programmed to open with a manual device or a wireless transmitter. Automatic gate operators can also be fitted with solar panels to operate without high voltage power. Many manufacturers offer battery backup either integrated or as an add on to systems that ensure function during loss of electricity.

  • The fencing adjacent to where the gate is installed.

  • Drawing power from the mains to open a driveway gate. Generally there are four types of electromechanical gate operator: Worm driven (or screw type) swing gates, barrier arm operators and sliding operators Electric and automatic gate openers are designed for both sliding and swinging gates. They can be programmed to open with a manual device or a wireless transmitter. Automatic gate operators can also be fitted with solar panels to operate without high voltage power. Many manufacturers offer battery backup either integrated or as an add on to systems that ensure function during loss of electricity.


 

References:

http://www.mechanicalengineeringprojects.net/automatic-gate-opener/2015/